Signature Electronic LED Sign to Arduino part 4

*** BREAKING NEWS!!! ***  The next batch of Cadaces modules are RED and GREEN in color.  This will require an updated adapter and updated software.  More to come as soon as I get it working!

Here are some additional pictures of the Arduino to Cadaces adapter.  Hopefully these are clear enough so you can make your own.  The two unused pins are for optional green LED's.

Several people have asked for a scrolling version of the software for the Cadaces modules to work with an Arduino processor.  So here it is:

//**************************************************************//
//  Name    : Scrolling Driver                                 //
//  Author  : Bob Davis                                         //
//  Date    : 2 January, 2013                                    //
//  Version : 1.0                                               //
//  Based on work of Hari Wiguna - http://g33k.blogspot.com/    //
//**************************************************************
// Pins for the row drivers, shift registers
int row1Pin = 1;
int row2Pin = 2;
int row3Pin = 3;
int rowEnable = 4;
int rclockPin = 5;
int clockPin = 6;
int dataPin = 7;

// Set the pins to output to the circuit
void setup() {
  pinMode(clockPin, OUTPUT);
  pinMode(dataPin, OUTPUT);
  pinMode(row1Pin, OUTPUT);
  pinMode(row2Pin, OUTPUT);
  pinMode(row3Pin, OUTPUT);
  pinMode(rowEnable, OUTPUT);
  pinMode(rclockPin, OUTPUT);
}

//=== B I T M A P ===
// Bits in this array represents one LED of the matrix
// 8 is number of rows, 10 is number of LED matrixes we have
byte bitmap[8][10]; 
// Change the 10 to however many matrices you want to use.
int numZones = sizeof(bitmap) / 8; 
// I will refer to each group of 8 columns as a Zone.
int maxZoneIndex = numZones-1;
int numCols = numZones * 8;

//=== F O N T ===
// Font courtesy of aspro648
// http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl?num=1203747843/22
// First char is @, next is A, B, etc.  Only upper case, no symbols.  
// The @ will display as space character.
byte alphabets[][5] = {
  {0,0,0,0,0},
  {31, 36, 68, 36, 31},
  {127, 73, 73, 73, 54},
  {62, 65, 65, 65, 34},
  {127, 65, 65, 34, 28},
  {127, 73, 73, 65, 65},
  {127, 72, 72, 72, 64},
  {62, 65, 65, 69, 38},
  {127, 8, 8, 8, 127},
  {0, 65, 127, 65, 0},
  {2, 1, 1, 1, 126},
  {127, 8, 20, 34, 65},
  {127, 1, 1, 1, 1},
  {127, 32, 16, 32, 127},
  {127, 32, 16, 8, 127},
  {62, 65, 65, 65, 62},
  {127, 72, 72, 72, 48},
  {62, 65, 69, 66, 61},
  {127, 72, 76, 74, 49},
  {50, 73, 73, 73, 38},
  {64, 64, 127, 64, 64},
  {126, 1, 1, 1, 126},
  {124, 2, 1, 2, 124},
  {126, 1, 6, 1, 126},
  {99, 20, 8, 20, 99},
  {96, 16, 15, 16, 96},
  {67, 69, 73, 81, 97},
};

//=== F U N C T I O N S ===
// This routine takes whatever is in the bitmap array and display it on the matrix
void RefreshDisplay()
{
  for (int row = 0; row < 8; row++) {
    //-- turn off the display --
    digitalWrite(rowEnable, HIGH); 
    //-- Shift out to each matrix (zone is 8 columns represented by one matrix)
    for (int zone = maxZoneIndex; zone >= 0; zone--) {
      shiftOut(dataPin, clockPin, MSBFIRST, bitmap[row][zone]);
    }
    digitalWrite(rclockPin, LOW); digitalWrite(rclockPin, HIGH);
    //-- turn the current row on --
    if bitRead(row,0) digitalWrite (row1Pin, HIGH); else digitalWrite(row1Pin, LOW);  
    if bitRead(row,1) digitalWrite (row2Pin, HIGH); else digitalWrite(row2Pin, LOW); 
    if bitRead(row,2) digitalWrite (row3Pin, HIGH); else digitalWrite(row3Pin, LOW);
    digitalWrite(rowEnable, LOW);
    //-- Wait a little bit to let humans see
    delayMicroseconds(500);
  }
}

// Converts row and colum to actual bitmap bit and turn it off/on
void Plot(int col, int row, bool isOn)
{
  int zone = col / 8;
  int colBitIndex = col % 8;
  byte colBit = 1 << colBitIndex;
  if (isOn)
    bitmap[row][zone] =  bitmap[row][zone] | colBit;
  else
    bitmap[row][zone] =  bitmap[row][zone] & (~colBit);
}

// Plot each character of the message, updated the display, shift bitmap left.
void AlphabetSoup()
{
  char msg[] = "ARDUINO LED SIGN";
//load in the characters
  for (int charIndex=(sizeof(msg)-1); charIndex >= 0 ; charIndex--)
  {
    int alphabetIndex = msg[charIndex] - '@';
    if (alphabetIndex < 0) alphabetIndex = 0;
    //-- Draw one character of the message --
    // Each character is only 5 columns wide
    for (int col = 5; col >= 0; col--)
    {
      for (int row = 0; row < 8; row++)
      {
        // Set the pixel to the alphabet for columns 0 thru 4
        bool isOn = 0;
        if (col<5) isOn = bitRead( alphabets[alphabetIndex][col], 7-row ) == 1;
        Plot( numCols-1, row, isOn); 
      }
      //-- The more times you repeat this loop, the slower we would scroll --
      for (int refreshCount=0; refreshCount < 50; refreshCount++)
        RefreshDisplay();
      //-- Shift the bitmap one column to left --
      for (int row=0; row<8; row++) //right shift
      {
        for (int zone=0; zone < numZones; zone++)
        {
          // This right shift would show a left scroll on display.
          bitmap[row][zone] = bitmap[row][zone] >> 1;  //right shift
          // Roll over lowest bit from the next zone as highest bit of this zone.
          if (zone < maxZoneIndex) bitWrite(bitmap[row][zone],7,bitRead(bitmap[row][zone+1], 0));
        }
      }
    }
  }
} 
//=== L O O P ===
void loop() {
  AlphabetSoup();
}