Friday, March 2, 2018

Arduino UNO Running 12 WS2812 LED Strips with a BIGGER Font

I have modified my LED sign setup once again.  I now have an Arduino UNO Running 12 WS2812 LED Strips with a BIGGER Font.  The 12x8 font had to be typed in manually as I could not find one that suited me.  To get 12 lines running from a UNO I used both the "B" and "D" ports or D0 to D11 data pins.  The uppercase fonts only use 10X8 as the lower two rows are for lower case letters that extend below the line.

This is what the sign looks like in multi-color mode.

Here is the Video:


I can also do graphics on the LED sign.  This is a picture of the logo that I uploaded as a BMP to the sign for display.  I was looking for something with lots of color and with a black background.  White backgrounds do not work very well as the white light blinds you!  To display graphics I had to write a routine to rotate the bytes from horizontal to vertical orientation.  Then I added an offset to make it scroll up.  I should mention that this is running in 8 data line mode, the right side loops back to the next 8 rows on the left side to get up to 16 lines to display.


This is the video on YouTube.



Here are a couple of still shots of the sign displaying graphics.



2 comments:

  1. Hello Sir, can u guide me how to make it scrolling text.I have tried many combination but failed. please guide.
    Thanks in advance.

    ReplyDelete
  2. I only wrote a scrolling version for the 8 line sign. Sorry. My code is on github under bobdavis321.

    ReplyDelete