My Commentary and Technical help

 I have updated my LED signs with an ESP32 processor and LED Dividers.  The hope is to eventually support some sort of graphics.  Maybe even...

These days there are some really cheap refrigerator plastic parts.  The things in the doors break and fall out.  The bottom shelf plastic fa...

I 3D printed yet another nerf gun.  The design I used is called "rektify" and is located on thingiverse here: https://www.thingive...

Yes, I bought a New-to-Me 2011 Chevy Equinox knowing that was a problematic year.  The crux of the issue is they added a high pressure fuel ...

I added the 3D Printed Nerf Launcher to the Arduino controlled tank.  I can control it from my phone via Bluetooth control.  I used a standa...

I am just finishing up building the InMoov Robot head.  First you must know that there are about four revisions for every part.  For instanc...

My third humanoid robot is working to some degree.  I have had lots of problems with the 3D printed parts.  The filament was likely the issu...

My latest creation uses dual 80x160 RGB LCD's to produce two robot eyes.  They are wired together so they can not "wink".  On ...

Improved the Arduino Robot Face by putting it on a 2.4 inch Parallel LCD. The LCD is a HY-TFT240 to be exact. This larger 320 by 240 LCD g...

 I thought I would try using a Nokia LCD for creating a face for my robot.  However I was greatly disappointed.  If you make his eyes white,...

I have started on making my third humanoid robot.  This one is modeled after the EZ-Robot JD Humanoid.  The issue with the larger humanoids ...