I have come across a new tool for computer / network repair called 'the dude'. I just used it to figure out why a server was not available to everybody. When I clicked on the server under 'the dude' it noted that there was no DNS name for the server! So I went to the server and changed some of its DNS settings, then restarted it, and then it worked fine. This was after about 4 hours of fighting with the server because just 2 computers could not log into it. One of those computers was mine! It worked fine the way it was for everyone else?
Friday, August 27, 2010
Wednesday, August 25, 2010
2000 Volt Washer Launcher/Can Crusher
My old 8 capacitor power supply is back in action! This time it has 10 capacitors, and delivers 2000 volts at 1600 amps from 1,600 uF of capacitors in a series/parallel combination. The old 5 watt resistor was replaced with a 50 watt resistor! It still smoked when it was powered on, likely from the grease from my fingers.
The video is already up on YouTube. It is at: http://www.youtube.com/watch?v=i87EuYIQO9c
I tried crushing three soda cans at once, a free launch that went way out of site, and upset the neighbors, you can hear them saying "What was that?" and then I crushed one soda can. Not included in the video is another free launch where I lost the washer. It was found later over 100 feet away on the far side of the house.
This is the schematic diagram. There is an error, the capacitors are only 4700 uF! The 'fire' resistor is 1K, and the meter resistor is 2.5 meg ohms, that value varies with the meter that is used. There is also a 10 amp fuse on the power coming in, it is built into the power jack. The coil is a flat coil of 14 gauge enameled wire covered in a lot of glue.
This is the schematic diagram. There is an error, the capacitors are only 4700 uF! The 'fire' resistor is 1K, and the meter resistor is 2.5 meg ohms, that value varies with the meter that is used. There is also a 10 amp fuse on the power coming in, it is built into the power jack. The coil is a flat coil of 14 gauge enameled wire covered in a lot of glue.
Tuesday, August 24, 2010
Lots of famous dead people
According to the latest onslaught of spam/virus there are a lot of famous dead people. The things these people will do to get you to open up a virus these days in amazing. There is no low they will not stoop to!
Monday, August 23, 2010
HP 1502 LCD Repair.
Someone asked me to fix a HP1502 LCD Monitor for them. When it was plugged in the power would only flash on for a second. After opening it up I could see that all the capacitors in the power supply were blown. There were two black 1000 uF at 16 volt capacitors that I removed before this picture was taken. There were 6 purple 470 uF at 16 volt capacitors that also needed replacement. However even after all of that was done, it did not fix it the monitor until I removed the fried zener diode that is located just below the burnt spot on the power supply board near the connector between the two boards. You can use a 12.6 volt zener to replace it but it works without any zener diode. The zener diode was most likely used as a surge suppressor and since the capacitors were not working that allowed non stop surges above the zener's rated voltage until the zener finally fried.
Viewsonic VG175 Revisited again.
One of the Viewsonic VG-175's LCD's that I had repaired years ago came back again for another repair. I suppose the only permanent repair would be to replace all of the capacitors but that is not an easy thing to do. This time it looked like a loss of horizontal sync and the culprit was C55 a 47 uF capacitor at 25 volts, or at least that is what I used to replace it. It is the light blue capacitor standing straight up near the middle of the picture of the circuit board.
Note that C19 was previously replaced it causes the picture to turn into dashes all over the screen. It is the dark blue capacitor kind of laying down near the center of the picture.
Note that C19 was previously replaced it causes the picture to turn into dashes all over the screen. It is the dark blue capacitor kind of laying down near the center of the picture.
The Google search algorithm changes again
Google has done it again, twice in one year, they have revised their search algorithm. In May 2010 they did something to try to make their search results more current and 'up to date'. The end results from what that did was to raise spam web sites to the top and flush long standing real companies web sites down the toilet. That change got the nick name "May Day". The latest revision took place around the middle of August 2010 and it raises the real companies back up from the junk heap by returning many results for any company that you look for. Just check out the results for one web site as seen in the picture below.
Tuesday, August 10, 2010
Prophecy given over me on August 7, 2010
I was at Sword and the Spirit church in Buffalo NY, for a special prophetic conference, a prophet named Leon was speaking. After the message he gave this word over me.
The Bible says that there was angels ascending and descending. When the pastor said that tonight about angels, revelation of heaven coming to earth, God said that you are going to be a revelation bearer. God said that He put a scribe anointing upon you and I put a teaching anointing within you. God said that I am going to bring you to a place of fulfillment in this season of your life. And God said that I am lighting your fire even with a new passion says the Lord. And God said that I have got new pathways and new doorways I am going to begin to open for you. God said you will be one that will be able to do as God is infusing and He is empowering you. Amen.
Those messengers of heaven, I can see revelation coming to you brother its like eyes are open and ears are open God says you are going to begin to hear new sounds of heaven and new revelation of heaven. God is going to give you, you are one that needs that order 1,2,3,4 and God says I am going to give it you just that way. Except He is going to move the three behind the four, God says I am going to do that because I am going to put you in a place where you always have to trust Me says the Lord, where your faith will always have to be activated says the Lord.
God says that Son I am going to fulfill the desires and the cries of your heart says the Lord.
The Bible says that there was angels ascending and descending. When the pastor said that tonight about angels, revelation of heaven coming to earth, God said that you are going to be a revelation bearer. God said that He put a scribe anointing upon you and I put a teaching anointing within you. God said that I am going to bring you to a place of fulfillment in this season of your life. And God said that I am lighting your fire even with a new passion says the Lord. And God said that I have got new pathways and new doorways I am going to begin to open for you. God said you will be one that will be able to do as God is infusing and He is empowering you. Amen.
Those messengers of heaven, I can see revelation coming to you brother its like eyes are open and ears are open God says you are going to begin to hear new sounds of heaven and new revelation of heaven. God is going to give you, you are one that needs that order 1,2,3,4 and God says I am going to give it you just that way. Except He is going to move the three behind the four, God says I am going to do that because I am going to put you in a place where you always have to trust Me says the Lord, where your faith will always have to be activated says the Lord.
God says that Son I am going to fulfill the desires and the cries of your heart says the Lord.
Search Engine Optimization
Search Engine Optimization Help. It is not rocket science, just think of why you search and what you search for on the Internet. Here are some keys I have discovered to getting recognized by the search engines.
1. Good Content. Write it yourself and have something there that is relevant and worth saying. Make sure your site has keywords included in the page titles, and bold the keywords in the text. One of the best subjects is problems you are having with a service or program. What did you do when you had the problem? YOU Googled it!
2. Good Links. Submit your articles to and get linked to by other sites like HackedGadgets, Wired, and others depending upon your content.
3. Get real Traffic. Add the ability to Tweet, FaceBook etc. your site and put some links on their sites yourself. Post real comments on related blogs with a link to you or your web site. A great add on to do this is 'add to any'.
4. Submit your site to the search engines. Do this regularly.
6. Install the Alexa toolbar and visit your site on a regular basis.
1. Good Content. Write it yourself and have something there that is relevant and worth saying. Make sure your site has keywords included in the page titles, and bold the keywords in the text. One of the best subjects is problems you are having with a service or program. What did you do when you had the problem? YOU Googled it!
2. Good Links. Submit your articles to and get linked to by other sites like HackedGadgets, Wired, and others depending upon your content.
3. Get real Traffic. Add the ability to Tweet, FaceBook etc. your site and put some links on their sites yourself. Post real comments on related blogs with a link to you or your web site. A great add on to do this is 'add to any'.
4. Submit your site to the search engines. Do this regularly.
5. Include and mark up your Pictures. Make sure all of your pictures have alt tags, a short description under the picture, etc. The picture shows how to do this in WordPress.
Bitdefender 2010 Problems
There are several Bitdefender 2010 and Microsoft Outlook problems
In early 2010 we switched from using Kaspersky Anti-Virus because it was hanging up computers for ever even with a clean install of Windows. After some research and some 30 day trial runs we decided on Bitdefender. However Bitdefender and Microsoft Outlook do not get along very well. There are three problems that we have noted so far;
If your computer only has 1 gig of Ram, even if just running Windows XP, upgrade it to 2 gigs. Once we installed Bitdefender the computers consistently went over 1 gig of memory. In fact my system likes to sometimes go over 2 gigs! That is when running IE8, FireFox, Outlook, Publisher, Word, and AIM. BTW - IE8 is a huge memory hog, I have seen it use 750 megs of Ram!
Something else we are looking at is a problem with FireFox not starting. I do not yet know if this is a Bitdefender problem. The solution is to use ‘alt’ ‘control’ and ‘delete’ to see how many copies of FireFox are running, (Sort the list alphabetically) then shut them all down. Then restart FireFox, so far this has worked every time.
In early 2010 we switched from using Kaspersky Anti-Virus because it was hanging up computers for ever even with a clean install of Windows. After some research and some 30 day trial runs we decided on Bitdefender. However Bitdefender and Microsoft Outlook do not get along very well. There are three problems that we have noted so far;
1. Timeouts while sending and receiving email. The solution is to set the timeout in Outlook to 4 minutes or more for each mail account.
2. Messages stuck in the ‘outbox’. Use ‘alt’ ‘control’ and ‘delete’ to make sure there is not another copy of outlook running. The solution is to restart outlook, open the message and send it again. Also you can also turn off Bitdefender anti-spam and this might cure the problem.
2. Messages stuck in the ‘outbox’. Use ‘alt’ ‘control’ and ‘delete’ to make sure there is not another copy of outlook running. The solution is to restart outlook, open the message and send it again. Also you can also turn off Bitdefender anti-spam and this might cure the problem.
3. Lost messages. Some messages disappear after they are received never to be seen again. So far this has been proven false every time someone made the claim. Usually they had stopped receiving email all together.
Don't forget to change the time when Bitdefender scans for virus’s to only once a week.
Something else we are looking at is a problem with FireFox not starting. I do not yet know if this is a Bitdefender problem. The solution is to use ‘alt’ ‘control’ and ‘delete’ to see how many copies of FireFox are running, (Sort the list alphabetically) then shut them all down. Then restart FireFox, so far this has worked every time.
Tuesday, August 3, 2010
Verizon Problems
Well after all the $30 a month straight talk cell phone problems I tried to get service from Verizon. I thought a land line would be nice and for $50 they promised to include unlimited calling and high speed Internet. So far my bills have been $75 and $89 and the Internet speed is .03 Mb/s, slower than dial up!
I printed out the screens, and waited. After a week or two I called and they said the order was lost so they started another order. But I was told the $50 deal was no longer available.
I printed out the screens, and waited. After a week or two I called and they said the order was lost so they started another order. But I was told the $50 deal was no longer available.
Note this is not my phone number! Anyway I called again and twisted their arm to give me the deal they promised in the first place. But they would not include the wireless router like they promised in the picture above.
Anyways after several more hours on the phone I finally got connected. The speed was really slow so after some more hours on the phone we discovered that their splitter was the problem. However the higher speed did not even last a day!
Monday, August 2, 2010
Pictures of the Randolph NY tornado damage
Here are some pictures of the Randolph NY tornado damage. The worst tree damage was on the hill above the town.
There was lots of damage around the cemetery.
Here is a house on the hill above the town.
There was lots of other damage in town, roofs damaged and a porch missing. We also saw where the car dealership lost most of its siding and roof. My camera's memory was full so I could not take any more pictures!
Wednesday, July 28, 2010
Tax the skinny to feed the fat
Well its happened, San Francisco California has banned non-diet soda from vending machines! Its enough that they tax the poor to feed the rich, now the efforts to tax the skinny to feed the fat have taken another step forward.
Think about this stupidity, who drinks non-diet soda? Skinny people. Who drinks diet soda and who eats diet food? Fat people do. So they want to eliminate non-diet food and drinks. Basically you will HAVE to eat diet food and drink diet drinks! These 'foods' are full of toxins and chemicals designed to make you fat!
When will these politicians wake up and get a sense of reality? Do they exist only in a dream world that is totally controlled by chemical companies? First they remove natural drugs and replace them with toxic chemicals and now they are doing the same thing to our foods, all in the name of more money for big drug companies!
Here is a link:
http://articles.mercola.com/sites/articles/archive/2010/07/27/san-francisco-bans-sodas-from-vending-machines.aspx
Some claim that the rich pay all of the taxes, if that is so then lets drop ALL taxes on people who are making less than $50,000 since 'they do not pay any taxes'. The notion promoted by the IRS and others that 95% of the taxes are from the top 5% income bracket is full of BULL. Here is clear proof taken from the same IRS web site. Note that about 1/3 of taxes are from Social Security. How much SS taxes do the top 5% pay? OOPS!
Think about this stupidity, who drinks non-diet soda? Skinny people. Who drinks diet soda and who eats diet food? Fat people do. So they want to eliminate non-diet food and drinks. Basically you will HAVE to eat diet food and drink diet drinks! These 'foods' are full of toxins and chemicals designed to make you fat!
When will these politicians wake up and get a sense of reality? Do they exist only in a dream world that is totally controlled by chemical companies? First they remove natural drugs and replace them with toxic chemicals and now they are doing the same thing to our foods, all in the name of more money for big drug companies!
Here is a link:
http://articles.mercola.com/sites/articles/archive/2010/07/27/san-francisco-bans-sodas-from-vending-machines.aspx
Some claim that the rich pay all of the taxes, if that is so then lets drop ALL taxes on people who are making less than $50,000 since 'they do not pay any taxes'. The notion promoted by the IRS and others that 95% of the taxes are from the top 5% income bracket is full of BULL. Here is clear proof taken from the same IRS web site. Note that about 1/3 of taxes are from Social Security. How much SS taxes do the top 5% pay? OOPS!
Just in case you missed that, the cap on the Social Security tax was about $100,000 the last time I checked. That means that income over that amount is NOT TAXED! So then we can conclude that 1/3 of the taxes are paid by people who are making less than $100,000!!!!
Monday, July 26, 2010
Allegany State Park Storms
This weekend we were at Allegany State Park during the storms. I stopped at the south side of the lake and took pictures of the storm to the North. That storm included a tornado that hit Randolph NY.
Note the swirling pattern in one of the clouds.


When we tried to leave the road to the Main Building was closed with trees across it as well as the road to the North to Salamanca. We stopped and talked to a policeman who was using an Axe to try to clear one of the roads.
Here is a link to the news article on the storms.
Whats this with the blue roof on the main building? It looked a lot better when it was brown.
Thursday, July 22, 2010
Tesla Coil Gossary
Tesla Coil Glossary by Bob Davis
Tesla Coil – A collection of coils and wire designed to make great big sparks
• Spark Gap Tesla Coil – a Tesla coil that uses a spark gap to switch the power just like Tesla did.
• VTTC – Vacuum tube Tesla Coil – One that uses vacuum tube(s) as the switching device.
• SSTC – Solid State Tesla Coil – An oxymoron as these things were never designed to do that.
• IGBT – Another type of SSTC but usually a little more successful at working without self destruction.
Transformer - device used to convert the main power source to something that will produce big sparks.
• NST - Neon Sign Transformer - Normally used to light the beer signs in bar windows but also used to make big sparks.
• OBIT - Oil Burner Ignition Transformer - Normally used to start a fire in an oil fed furnace but can also produce big sparks.
• MOT - Microwave Oven Transformer - Normally used to cook your food but it can also cook you.
These normally do not produce long enough of a spark but they can be wired in series or used with a voltage doubler.
Capacitor – Device used to store a charge then release it to produce bigger sparks.
• Paper capacitor – Aluminum foil and paper arranged to make a capacitor.
• Door Knob Capacitor – Big capacitor that is shaped like a door knob, usually these can take a lot of volts.
• Home made capacitor – Old beer bottles or whatever used to make a home made capacitor.
• MMC – Many, Many Capacitors - arranged in series or series/parallel to make one big capacitor.
Spark gap – Favorite part – makes sparks what else? Sometimes self-destructs.
• Fixed Spark Gap – Two things that sparks fly in between – sometimes intentionally.
• Multiple Spark Gap – Several spark gaps arranged in series, usually air cooled too.
• RSG - Rotary Spark Gap – Motor driven rotating spark gap, runs cooler as power is only on for a ‘short’ time.
Coil – Sometimes just a pile of wire but it should be neatly wound in circles to look good.
• Primary coil – Flat or angled coil of large wire that creates the primary magnetic field.
• Secondary coil – Long coil of fine wire used to pick up the magnetic field from the primary, many, many turns but it looks neat of wound properly.
• Choke – A type of coil usually wound around a ferrite core and it is used to stop RF noise.
Top Load – Anything from an aluminum plate to a large torroid used to store the high voltage until it arcs over and makes big sparks.
Tesla Coil – A collection of coils and wire designed to make great big sparks
• Spark Gap Tesla Coil – a Tesla coil that uses a spark gap to switch the power just like Tesla did.
• VTTC – Vacuum tube Tesla Coil – One that uses vacuum tube(s) as the switching device.
• SSTC – Solid State Tesla Coil – An oxymoron as these things were never designed to do that.
• IGBT – Another type of SSTC but usually a little more successful at working without self destruction.
Transformer - device used to convert the main power source to something that will produce big sparks.
• NST - Neon Sign Transformer - Normally used to light the beer signs in bar windows but also used to make big sparks.
• OBIT - Oil Burner Ignition Transformer - Normally used to start a fire in an oil fed furnace but can also produce big sparks.
• MOT - Microwave Oven Transformer - Normally used to cook your food but it can also cook you.
These normally do not produce long enough of a spark but they can be wired in series or used with a voltage doubler.
Capacitor – Device used to store a charge then release it to produce bigger sparks.
• Paper capacitor – Aluminum foil and paper arranged to make a capacitor.
• Door Knob Capacitor – Big capacitor that is shaped like a door knob, usually these can take a lot of volts.
• Home made capacitor – Old beer bottles or whatever used to make a home made capacitor.
• MMC – Many, Many Capacitors - arranged in series or series/parallel to make one big capacitor.
Spark gap – Favorite part – makes sparks what else? Sometimes self-destructs.
• Fixed Spark Gap – Two things that sparks fly in between – sometimes intentionally.
• Multiple Spark Gap – Several spark gaps arranged in series, usually air cooled too.
• RSG - Rotary Spark Gap – Motor driven rotating spark gap, runs cooler as power is only on for a ‘short’ time.
Coil – Sometimes just a pile of wire but it should be neatly wound in circles to look good.
• Primary coil – Flat or angled coil of large wire that creates the primary magnetic field.
• Secondary coil – Long coil of fine wire used to pick up the magnetic field from the primary, many, many turns but it looks neat of wound properly.
• Choke – A type of coil usually wound around a ferrite core and it is used to stop RF noise.
Top Load – Anything from an aluminum plate to a large torroid used to store the high voltage until it arcs over and makes big sparks.
Wednesday, July 21, 2010
My big Tesla Coil revisited
Recently I dug out my big Tesla Coil and decided to update it and make it better. Some changes I hope to try are a bigger top load, try two capacitors in parallel and make an angled primary coil.
First of all here is the current schematic. I realized that I had never made a schematic for it.
Here are some pictures of the guts. First we have the Neon Sign Transformer or NST. It delivers 12KV at 30 ma.
Next we have the spark gap. It consists of 5 pieces of 1/2 inch copper pipes spaced about 1/8 inch apart inside of a 4 inch PVC pipe with a fan blowing air down them to cool them and to quench the sparks.
Then we have a front view of all of the guts. The safety gap is the closest item, the transformer connects across it. Then on the right and left are the choke coils. Between them is the .06 uF 30KV capacitor and in the back is the spark gap assembly. Above that you see the primary coil made from #10 electrical wire.
Now for a picture of everything at once. The secondary coil is wound on a piece of 4 inch PVC about 28 inches long. The top load is some flexible 3 inch drier vent pipe glued to an aluminum pie plate.
The video is uploaded to YouTube. The sparks are about 15 inches long. It used to do nearly 2 foot sparks. I am not sure why the sparks are smaller.
http://www.youtube.com/watch?v=3rwQZdZYdss
First of all here is the current schematic. I realized that I had never made a schematic for it.
Here are some pictures of the guts. First we have the Neon Sign Transformer or NST. It delivers 12KV at 30 ma.
Next we have the spark gap. It consists of 5 pieces of 1/2 inch copper pipes spaced about 1/8 inch apart inside of a 4 inch PVC pipe with a fan blowing air down them to cool them and to quench the sparks.
Then we have a front view of all of the guts. The safety gap is the closest item, the transformer connects across it. Then on the right and left are the choke coils. Between them is the .06 uF 30KV capacitor and in the back is the spark gap assembly. Above that you see the primary coil made from #10 electrical wire.
Now for a picture of everything at once. The secondary coil is wound on a piece of 4 inch PVC about 28 inches long. The top load is some flexible 3 inch drier vent pipe glued to an aluminum pie plate.
The video is uploaded to YouTube. The sparks are about 15 inches long. It used to do nearly 2 foot sparks. I am not sure why the sparks are smaller.
http://www.youtube.com/watch?v=3rwQZdZYdss
WordPress Super Cache or Really Static?
We have been trying to get our Word Press pages to load as fast as you would expect them to. We eventually went to 'Really Static' to cache our web pages. It knocked the socks off of every other WP cache program! Then we upgraded to WP 3.0 and our site speed dropped back to what it was before we used a caching program.
In the picture above the short lived dip below 1.5 seconds was when we used 'Really Static'. Then the jump back up to 4 seconds per page was when we upgraded to WP 3.0. Now here is a really interesting question, is this chart relevant? For one thing WP Super Cache does not return cached pages to 'bots' and 'spiders'. That 'feature' can be turned off by deleting all the entries under 'Rejected User Agents'. According to one web site that change may double your performance while reducing server load.
Another feature to change in WP Super Cache from the default settings is to enable 'preload cache mode' and set the time to 1440 minutes. That is to only load the cache every 24 hours. That is fine for us because we do not allow comments, you would have to make an exception for comments if you allow comments.
All together though it appears like WP 3.0 is REALLY SLOW! We are trying to find a solution, but let me know if you know of one!
In the picture above the short lived dip below 1.5 seconds was when we used 'Really Static'. Then the jump back up to 4 seconds per page was when we upgraded to WP 3.0. Now here is a really interesting question, is this chart relevant? For one thing WP Super Cache does not return cached pages to 'bots' and 'spiders'. That 'feature' can be turned off by deleting all the entries under 'Rejected User Agents'. According to one web site that change may double your performance while reducing server load.
Another feature to change in WP Super Cache from the default settings is to enable 'preload cache mode' and set the time to 1440 minutes. That is to only load the cache every 24 hours. That is fine for us because we do not allow comments, you would have to make an exception for comments if you allow comments.
All together though it appears like WP 3.0 is REALLY SLOW! We are trying to find a solution, but let me know if you know of one!
Tuesday, July 20, 2010
'Turn your Scars into Stars'
'Turn your Scars into Stars'. That is what a counselor named Gale taught me to say a few years ago. Well that is what happened to me earlier this year.
A few years ago I visited a chiropractor where I discovered that my left leg was 3/4 of an inch shorter than my right leg. This caused a arch in my lower back and constant back pain. The cure was to wear a shim in my left shoe to try to correct the difference in length.
Last year I was in West Africa with my brother and two others. While there we were walking down a dimly lit road and out of nowhere something resembling a head and shoulders headed right for me. It was a shadow figure being lit up from behind so we could see it. I stepped to the side to avoid a collision and fell into a nearby storm drain. My foot failed to find something in the drain to stand on in order to stop my fall, so I went all the way down scraping my arms up on the pavement as I fell. My foot was a mess, but we bandaged it up and kept on going. It could not hold my weight and turned black an blue.
Early this year I was in a church service where the guest speaker spoke of back pain being healed. I realized that my back was not hurting and then put my feet out in front of me to discover that my legs were now the same length! Somehow having my left foot mangled made my left leg longer?
Then in April of this year I was dragging a small shed that I was removing from my property out to the curb for the garbage collector. For some stupid reason instead of pulling it straight I was twisting my back to pull it sideways. Needless to say I hurt my back. After a couple of days of really bad pain I went to a new chiropractor. He checked my legs and there was a tiny difference so he adjusted my hips and back. I told him that my left leg had been 3/4 of an inch shorter and he told me that was impossible! I told him that Dr Redding in Lima has the X-rays to prove it. he simply did not believe me!
The accident in Africa that was meant to disable me has actually enabled me. I no longer need a shim in my left shoe. My legs are within 1/4 of an inch of being the same length. What was meant for bad actually helped me.
A few years ago I visited a chiropractor where I discovered that my left leg was 3/4 of an inch shorter than my right leg. This caused a arch in my lower back and constant back pain. The cure was to wear a shim in my left shoe to try to correct the difference in length.
Last year I was in West Africa with my brother and two others. While there we were walking down a dimly lit road and out of nowhere something resembling a head and shoulders headed right for me. It was a shadow figure being lit up from behind so we could see it. I stepped to the side to avoid a collision and fell into a nearby storm drain. My foot failed to find something in the drain to stand on in order to stop my fall, so I went all the way down scraping my arms up on the pavement as I fell. My foot was a mess, but we bandaged it up and kept on going. It could not hold my weight and turned black an blue.
Early this year I was in a church service where the guest speaker spoke of back pain being healed. I realized that my back was not hurting and then put my feet out in front of me to discover that my legs were now the same length! Somehow having my left foot mangled made my left leg longer?
Then in April of this year I was dragging a small shed that I was removing from my property out to the curb for the garbage collector. For some stupid reason instead of pulling it straight I was twisting my back to pull it sideways. Needless to say I hurt my back. After a couple of days of really bad pain I went to a new chiropractor. He checked my legs and there was a tiny difference so he adjusted my hips and back. I told him that my left leg had been 3/4 of an inch shorter and he told me that was impossible! I told him that Dr Redding in Lima has the X-rays to prove it. he simply did not believe me!
The accident in Africa that was meant to disable me has actually enabled me. I no longer need a shim in my left shoe. My legs are within 1/4 of an inch of being the same length. What was meant for bad actually helped me.
Thursday, July 15, 2010
Salamanca NY Fire
There was a big fire in Salamanca NY a couple of months ago. The fire was on a Friday and we saw it on Sunday, there was still some rising and firetrucks on the scene. I forgot my camera but someone was going to email me some pictures. Anyway we were back there a few weeks ago and I took a number of pictures.
This is a composite of four picture to try to show the area of devastation. The building was 4 stories tall and about 1/2 a block in length. It went from the silo on the left all the way to the last pile of bricks on the right. There was one wall left of the building on the left after the fire but they likely knocked it down for safety reasons.
If you click on the picture you can then see it full size. You may have to enlarge your browser window too.
Here is the news link with a video of the fire:
http://www.wkbw.com/news/local/93163369.html
This is a composite of four picture to try to show the area of devastation. The building was 4 stories tall and about 1/2 a block in length. It went from the silo on the left all the way to the last pile of bricks on the right. There was one wall left of the building on the left after the fire but they likely knocked it down for safety reasons.
If you click on the picture you can then see it full size. You may have to enlarge your browser window too.
Here is the news link with a video of the fire:
http://www.wkbw.com/news/local/93163369.html
Wednesday, July 14, 2010
Bathroom Light Fixtures on EBay
There are cheap three light Bathroom Light Fixtures on EBay. You get four of them for only about $22 including shipping! They are missing the globes but I have some extra globes laying around. I needed 2 of them for my bathrooms but used a third for the kitchen. I took that one apart and removed the arms so the fixtures fastened onto the back plate.
Tuesday, July 13, 2010
Another virus?
This computer developed a problem where it could not send or receive email via MS outlook. I ran every anti-virus program I could find: MS MRT, BitDefender, MalWare Bytes, and SpyBot just to name a few of them. I un-installed and reinstalled MS Office. I nuked the PST file and created a new one. All of this to no avail. After two days of working on the computer I discovered an obscure setting in MS Outlook that was blocking all email. It is found under Options, advanced options, add-in manager. Something called 'Redemption Center Outlook Extension' was installed. How reinstalling Office could not fix this I do not know. That's the problem with reinstalling MS Software, it leaves a lot of junk behind that reappears when you reinstall it!
Monday, July 12, 2010
Gas Drilling in the Marcellus Shale
Well I went home to my moms in Northeastern Pennsylvania for the weekend and discovered two things. First the 91 year old lady with two dead bodies in her house that has been in the news lately happens to live at the house that my grandma and grandpa Butts lived in.
Secondly, across the road from my moms is a new gas well that is being drilled. They are working 24 hours a day 7 days a week drilling away. There are also several gas drilling related companies that are springing up in the area. This is what a typical well being drilled looks like.
Secondly, across the road from my moms is a new gas well that is being drilled. They are working 24 hours a day 7 days a week drilling away. There are also several gas drilling related companies that are springing up in the area. This is what a typical well being drilled looks like.
Thursday, July 8, 2010
How to get rich on the Internet
For years I have said that the fastest way to get rich on the Internet is to sell get rich quick schemes. Here is how it works, first you sell a few things and make some money but then you put together a plan on how to sell tings and make money. Then you sell the PLAN and in this down economy everybody is looking to find out how to make money on the Internet. So that drives a lot of people to your site and that in turn helps sell your get rich quick plan and on and on the cycles continues. Before long you are a millionaire. It was not by selling tangible goods but by just selling a PLAN so your costs are almost nothing but your profit is close to 100%! What a deal!
By posting this to my blog it will cause thousands of people to find my blog and I will be rich, RICH, R-I-C-H! Don't count on it.......
By posting this to my blog it will cause thousands of people to find my blog and I will be rich, RICH, R-I-C-H! Don't count on it.......
Wednesday, July 7, 2010
using Wireshark to monitor network traffic
I wish that I could say that I have used WireShark to find a virus infected computer, but so far I have not been able to find anything with it. However I did discover this neat Network IO monitor. It is under statistics, IO Graphs. Whenever the network acts up I can see that the network traffic has peaked out.
One thing that might hold you back from using WireShark is the need to tap into the network. The tap is really a lot easier than it sounds. You just need an old network cable and a couple of network jacks. Pull the orange and green pairs out of the network cable and connect them to the green pairs on the network jacks as in the picture below. This cable then goes from your router to your main switch. Or in a home network from your modem to your router. That way you can monitor all of the traffic from your computers going to the Internet.
Then start WireShark and select your network card. You can then selectively monitor the incoming or the outgoing network traffic by what network jack you plug the network cable from the monitoring computer into. If you leave the program running for more than a few hours the computer may crash as it tends to run out of memory.
Monday, July 5, 2010
July Fourth Ultra-Light flight
Over the Fourth of July I got to go on a flight on an ultralight aircraft over Arcade NY and some surrounding towns. The aircraft fits nicely on a Ski-Do trailer with a few modifications.
We took off in Chaffee NY and then flew south to Arcade. The biggest landmark from the air is the Wast Management dump, we flew directly over it on the way back to the airport.
I hope to upload a video to YouTube later to show some of the flight. It was a blast, I really enjoyed it!
Here is a link to the video on YouTube:
http://www.youtube.com/watch?v=4R5H0iUXLOAHere is a picture captured from the video. It shows Arcade valley Estates on the left and the high school on the right. The red box at the far right is the new football field.
Subscribe to:
Posts (Atom)