SainSmart DDS120/DDS140 USB DSO Oscilloscope

I just purchased a SainSmart DDS140 DSO on eBay. So far I have figured out how to get a trace on the screen using the built in signal generator.  Who puts the "Start" button in the bottom right corner?  Next is to test it in some real world situations like my WS2812 LED strip signs.

This is the built in 1 KHz test signal.

This is the "0" bit for my WS2812 signs.  It is .19 us, it is supposed to be about .400 us.

This is the "1" bit for my WS2812 signs.  It is .57 us, it is supposed to be about .800 us.  I had to measure from the center line as the trigger had issues with the lower signal level.  In fact I had to write a version of the sign software that sent all 1's to be able to capture the pulses.