Ionic Foot Bath Detox Controller Modification.

I recently took apart a Ionic foot bath controller to try to silence the beeper.  It beeps far too much saying the current is not correct.  It actually says "Add Water".

First of all you can dissemble the array.  It NEEDS to be cleaned after every use.  If not stuff builds up on it and it becomes unusable.

 This is what the controller looks like with the cover removed.

 This is the back side of the control panel.

 Here is the power supply.

 The controllers weight comes from this big power transformer.

 This is a picture of the front side of the controller.

 i changed a resistor value in the controller driver circuit for the beeper.  It had no effect.