Monday, October 10, 2011

Viewsonic VG700 repair

The viewsonic VG700 has the usual two capacitors in the inverter problem. However it is tricky to get it apart. First snap out the control panel at the bottom front of the monitor. Remove 2 screws and slide the bezel up then out.

Next you remove the four screws and gently pry the LCD screen forward and out of the RF shield. Be careful of the cables as they are all barely long enough and will not unplug on their own.

The faulty capacitors are in the middle of that circuit board on the right, they are bulging and oozing.
Post a Comment